ASME Pipe Weight Calculator

The Fab Guru Engineering Tool

Advanced pipe calculator with ASME B36.10, ASME B36.19, NPS, DN, schedule, STD, XS, XXS, weight, surface area, volume, paint quantity, insulation area, cost, chart and export.

Input Parameters

Pipe Standard

Size Display

Dimension Unit

Pipe Size

Schedule / STD / XS / XXS

Length

Length Unit

Material Density

Custom Density kg/m³

Material Rate ₹/kg

Paint Coverage m²/L

Total Pipe Weight0.00 kg

NPS–

DN–

Selected Thickness–

Outside Diameter–

Wall Thickness–

Inside Diameter–

Weight / Meter–

Weight / Foot–

Outer Surface Area–

Internal Volume / Water Capacity–

Paint Quantity–

Insulation Area–

Estimated Cost–

STD = SCH 40 only up to NPS 10. XS = SCH 80 only up to NPS 8. Above these sizes, STD and XS are separate commercial wall thicknesses.

Pipe Weight Chart

Chart generated from the calculator database.

Pipe Weight Formula

Pipe weight kg/m = 0.0246615 × (OD – t) × t × density factor

OD and wall thickness are in mm. Density factor is material density divided by 7850 kg/m³.

What is ASME B36.10?

ASME B36.10 is used for welded and seamless wrought steel pipe dimensions, schedules and nominal weights.

What is ASME B36.19?

ASME B36.19 is used for stainless steel pipe dimensions including 5S, 10S, 40S and 80S schedules.

FAQ

Is XS always equal to SCH 80?
No. XS is equal to SCH 80 only up to NPS 8. Above NPS 8, XS is normally 12.70 mm wall thickness.

Is STD always equal to SCH 40?
No. STD is equal to SCH 40 only up to NPS 10. Above NPS 10, STD is normally 9.53 mm wall thickness.